How to Download and Use Mstar ISP Utility for LG Monitors
Mstar ISP Utility is a software tool that allows you to update the firmware of your LG monitor using a serial port connection. This can help you fix some issues with your monitor, such as flickering, color distortion, or brightness problems. In this article, we will show you how to download and use Mstar ISP Utility for LG monitors.
Step 1: Download Mstar ISP Utility
You can download Mstar ISP Utility from the official LG website. Here is the link: https://www.lg.com/us/support/software-firmware-drivers. Enter your monitor model number in the search box and click on the Software, Firmware & Drivers tab. You should see a list of available downloads for your monitor. Look for the file named Mstar ISP Utility and click on the Download button. Save the file to your computer and unzip it.
mstar isp utility lg download software
Download File: https://www.google.com/url?q=https%3A%2F%2Furluso.com%2F2tH5uo&sa=D&sntz=1&usg=AOvVaw3mfdV5Wt8TIDntxvAZf3lY
Step 2: Connect Your Monitor to Your Computer
You will need a serial port cable to connect your monitor to your computer. If your computer does not have a serial port, you will also need a USB to serial adapter. Plug one end of the cable into the service port of your monitor, which is usually located at the back or the bottom of the monitor. Plug the other end of the cable into the serial port of your computer or the USB to serial adapter. Make sure the cable is securely connected and not loose.
Step 3: Run Mstar ISP Utility
Open the folder where you extracted Mstar ISP Utility and double-click on the file named MstarISPTool.exe. This will launch the Mstar ISP Utility program. You should see a window like this:
Click on the Connect button at the top left corner of the window. The program will try to detect your monitor and show its information in the Device Info section. If you see a message saying \"Connect Fail\", make sure your cable is properly connected and try again.
Step 4: Update Your Monitor Firmware
Click on the Browse button at the top right corner of the window and locate the firmware file for your monitor. The firmware file should have a .bin extension and should be included in the folder where you extracted Mstar ISP Utility. Select the firmware file and click on Open. The program will load the firmware file and show its information in the File Info section.
Click on the Auto button at the bottom right corner of the window. The program will start updating your monitor firmware and show its progress in the Status section. Do not disconnect or turn off your monitor or computer during this process. Wait until you see a message saying \"Update OK\" in green.
Step 5: Restart Your Monitor
After updating your monitor firmware, you need to restart your monitor to apply the changes. Unplug the power cord of your monitor and wait for a few seconds. Then plug it back in and turn on your monitor. You should see a message saying \"Firmware Update Complete\" on your screen.
Congratulations! You have successfully updated your monitor firmware using Mstar ISP Utility. You can now close the program and disconnect the cable. 0efd9a6b88